List of publications in referred international/national journals

• Govardhan Goud and R.N. Rao, (2011), “The effect of alkali treatment on dielectric properties of roystonea regia/epoxy composites”, International Journal of Polymer Analysis and Characterization, 16, 239–250.
• Govardhan Goud and R.N. Rao, (2011), “Effect of Fiber Content and Silane Treatment on Mechanical Properties of Roystonea Regia / Epoxy Composites”, International Journal of Advanced Materials Sciences, 2, 61-68.
• Govardhan Goud and R.N. Rao, (2011) “Effect of fiber content and alkali treatment on mechanical properties of roystonea regia reinforced epoxy partially bio degradable composites”, Bulletin of Materials Science ,34, No. 7, 1575–1581.
• Govardhan Goud and R.N. Rao, (2012) “Mechanical and electrical performance of roystonea regia/glass fiber reinforced epoxy hybrid composites”,   Bulletin of Materials Science 35, No. 4, 595–599.
• Govardhan Goud and R.N. Rao, (2012) “Effect of surface modification and hybridization on Dynamic mechanical properties of roystonea regia/glass-epoxy composites”, Bulletin of Materials Science, 35, No. 7, 1143–1149.
• Govardhan Goud and R.N. Rao, “Combined effect of alkali and silane treatments on tensile    and          impact properties of roystonea regia natural fiber reinforced epoxy Composites”     Applied Polymer Composites Vol. 1, No. 3, 2013, 186-196.
• Raghu M J & Govardhan Goud  “Mechanical properties of Milkweed fiber reinforced composites”  International Journal of Engineering Researches and Management Studies, P11-18, 2017.
• S.Chethan, S. Suresha, Govardhan Goud. “Influence of optimally treated Luffa Cylindrica fibres on tensile and flexural characteristics of epoxy composites”, AIP Publishing, 2019. DOI: 10.1063/1.5085591
• Chethan, S. Suresha, Govardhan Goud “Influence of SiC Particulates on Dynamic Mechanical Response of Treated Luffa Cylindrica Epoxy Composites”, Indian Journal of Science and Technology, 12(27), (2019), 1-10 DOI: 10.17485/ijst/2019/v12i27/145921.
• N. Vasantha Kumar, Govardhan Goud, P. C. Sharath Study of Wear Properties of Vinyl Ester Polymer Filled with Micro-Gr-Nano-CuO Particles, Emerging Trends in Mechancial Engineeering Select Proceedings of ICETME 2018, https://doi.org/10.1007/978-981-32-9931-3_48, ISSN 2195-4356, ISSN 2195-4364, 499 -509.
• Raghu M J and  Govardhan Goud,  Tribological Properties of Calotropis Procera Natural Fiber Reinforced Hybrid Epoxy Composites,  Applied Mechanics and Materials, 2019,  ISSN: 1662/7482, (https://scholar.google.com/citations?view_op=view_citation&hl=en&user=aYSlX1kAAAAJ&citation_for_view=aYSlX1kAAAAJ:d1gkVwhDpl0C)

• Raghu M J and  Govardhan Goud;  Effect of water absorption on mechanical properties of calotropis procera fiber reinforced polymer composites; Journal of Applied Agricultural Science and Technology; 2020;  ISSN: 2621/2528; vol 4; issue 1; pp 3-11
• Raghu M J and  Govardhan Goud;  Development of Calotropis procera-Glass Fibers Reinforced Epoxy Hybrid Composites;  Journal of Natural Fibers; 2020; vol 9; issue 2; pp 395-402
• Balaji V and Dr. Govardhan Goud;  Synthesis and characterization of epoxy based hybrid composite reinforced with glass fiber, royal palm fiber and titanium fillers;  NeuroQuantology, volume 20, issue 16, , page 2038-2043, Nov 2022
• Balaji V and Dr. Govardhan Goud;   Effect of ceramic fillers on Mechanical and wear properties of royal palm- glass epoxy composites, a comparative study;  NeuroQuantology, volume 20, issue 16, , page 2038-2043, Nov 2022
• Balaji V and Dr. Govardhan Goud;  Mechanical  properties of roystonia regia glass epoxy composites filled with SiC fillers;  Materials Today: Proceedings(Vol 54, part 2,527-530; 2022;  https://doi.org/10.1016/j.matpr.2021.12.144
•  Influence of surface treatment on mechanical properties of Roystonearegia/banana fibre reinforced hybrid polyester composites
• H.R. Anand, Govardhan Goud ,  K.N. Madan Kumar c, L. Vinay  “Influence of surface treatment on mechanical properties of Roystonearegia/banana fibre reinforced hybrid polyester composites”  Materials Today: Proceedings  2023(https://doi.org/10.1016/j.matpr.2023.06.099)
• Anand HR, Dr. Govardhan Goud, Karthik and B Kuldeep “Investigation of physical, Di-electric and hydrophobicity properties of roystonea regia/banana fibre polyester composites in both alkali treated and untreated conditions” , Engineering Research Express, Volume 5, Number 3, 2023( Citation H R Anand et al 2023 Eng. Res. Express 5 035058DOI 10.1088/2631-8695/acf54b)
• Anand HR, Dr. Govardhan Goud, Karthik Sathynarayana, and Madhu Puttegowda “Influence of Water Absorption on Mechanical and Morphological Behaviour of Roystonea-Regia/Banana Hybrid Polyester Composites”  Applied Science and Engineering Progress, Vol. 17, No. 1, 2024, 7074
• Balaji V, Govardhan Goud “Influence Of Alumina Fillers On Mechanical Behaviour Of Royal Palm Glass/Epoxy Hybrid Composites”  FOUNDRY JOURNAL[ISSN:1001-4977] VOLUME 27, ISSUE 11, in this academic year.

List of papers presented in International/National Conferences

• “Effect of normal load and sliding velocity on specific wear rate of carbon fabric reinforced epoxy composite with graphite filler”, Govardhan Goud, Dr. B Suresha and Dr.S.L.Ajith Prasad, National Conference on Eco-Frindly plastic and rubber systems(MACRO-08-NCEPRS), Sri Jayachamarajendra College of Engineering, Mysore-570006, India, May 19-20, 2008.
• “Effect of fiber treatment on flexural properties of roystonea regia / epoxy partially bio degradable composites”, Govardhan Goud and R.N. Rao, Second International Conference on Natural Polymers(ICNP-2010), Kottayam, India, 24-26 September-2010.
• “Micro hardness and shore D hardness properties of untreated and alkali treated roystonea regia / epoxy partially biodegradable composites”, Govardhan Goud and R.N. Rao, First International Conference on Composites and Nanocomposites  (ICNC-2011), Kottayam, India, 7-9 January-2010.
• “Effect of surface modification on water absorption characteristics of roystonea regia/epoxy composites”, Govardhan Goud and R.N. Rao, National Conference on Recent Advances in Mechanical Engineering (NCRAME – 2011), RVR&JC College of Engineering, Guntur, India, July 7-8, 2011.
• “Effect of orientation on tensile properties of roystonea regia natural fiber reinforced epoxy composites”, Govardhan Goud and R.N. Rao,  International Conference on Advanced Materials, Manufacturing Science, Management and Thermal Sciences AMMMT-2013, SIT,Tumkur, Karnataka, India, 3 – 4 May 2013.
• “Combined effect of alkali and silane treatments on tensile properties of roystonea regia natural fiber reinforced epoxy composites”,  Govardhan Goud and R.N. Rao, Third International Conference on Natural Polymers(ICNP-2010), Kottayam, India, 26-28 October-2012.
• “Challenges of Lean implementation in a organization: A review”, Reema D’Souza and Govardhan Goud.  International Conference on Advance research in mechanical, material science, industrial engineering and management(ICARIMMIEM-2014), CJIT& S, Yashwantpur, Janagaon, Warangal, A.P, India, 6-8 Jan 2014.
• “Effect of alkali treatment on dry sliding wear behavior of roystonea regia natural fiber reinforced epoxy composites” Govardhan Goud, Patil Kamalesh Kalyan, Patil Tushar Ramgonda, Khot Swapnil Mukesh and Patil Abhishek Adagouda, International Conference on Polymer Composites(ICPC-2014), NIT- Suratkal,Karnataka, India, 19 & 20 Dec’2014.
• “Mechanical properties of  Milk weed fiber reinforced composites” Govardhan Goud and Raghu M J at International National  Conference on Advances in Mechanical Sciences(ICAMS-2017)  at MCE Hassan, 3-5 March 2017.
• “Effect of alkali treatment on  Mechanical properties of  Milk weed fiber reinforced Epoxy Polymer composites” Govardhan Goud and Raghu M J at International National  Conference on Advances in Mechanical Engineering Sciences(ICAMES-17)  at PESCE-Mandya, 21&22nd  April 2017.
• Design and fabrication of Portable fork lift Govardhan Goud, National level conference and technical fest FIESTA 2019 at BCE-Shravanabelagola 25&26 April 2019.

PhD’s awarded under the Guidance of Dr. Govardhan Goud: 05

PhD’s pursuing under the Guidance of Dr. Govardhan Goud: 01

Faculty Development Programs/ Workshops/ STTP

• Attended a FDP on LATEX  held in B.C.E- Shravanabelagola from28/07/2016 to 29/07/2016
• Attended a FDP on Research Funding Opportunities and Proposal preparations for academicians held in PESITM-Shimoga from 27/04/2019 to 29/04/2019
• Attended a FDP on Information and Communication Technology(ICT) in Education  held in B.C.E- Shravanabelagola from17/08/2019 to 19/08/2019
• Participated in Faculty Development Program on Augmented Reality / Virtual Reality (AR/VR) Industry Organized by the Dr. Vithalrao Vikhe Patil College of Engineering, Ahilyanagar, Maharashtra. C V Raman Global University, Odisha. C V Raman Polytechnic Bhubaneswar in Collaboration with ExcelR Edtech Pvt. Ltd. from 25/08/2025 to 31/08/2025.
• Attended a Workshop on Finalization of draft syllabus (V to VIII) in Mechanical Engineering of VTU held in B.C.E- Shravanabelagola from29/04/2008 to 30/04/2008.
• Attended a Workshop on Enterpreneurship and Management held in SJCIT- Chikballapur from01/08/2008 to 02/08/2008.
• Attended a Workshop on Tribology frontiers in design and manufacturing  in NITK- Surathkal from 24/10/2016 to 25/10/2016.
• Attended a STTP on Automation and Robotics in NIT, Warangal from 06/07/2009 to 18/07/2009.

• Attended Faculty development program on “Emerging Trends in Energy Sources” at Ghousia College of Engineering, Ramanagaram.
• Participated in Mission10X Workshop conducted by Wipro on “High Impact Teaching Skills” at BTL Institute of Technology, Bangalore.
• Attended Workshop on “AutoCAD Inventor” at UVCE, Bangalore.
• Attended Workshop on “Polymer composite materials and Smart materials” at NITK, Surathkal.
• Secured First position in National level paper presentation held at Cochin University College of Engineering Kuttanad, Pulincunnoo.
• Presented seminar on “Polymer composite materials: Manufacture, Properties and their applications” at S.J.C. Institute of Technology, Chickballapur.
• Attended Workshop on “Composite materials: Design, Manufacture and Applications” at PESIT, Bangalore.
• Attended Faculty development program on ‘Inculcating Universal Human Values in Technical Education’ during 2-6 November, 2020 as organized by All India Council for Technical Education (AICTE).
• Attended the AICTE-VTU Joint Teachers training Programme on “Introduction to Python Programming & its Applications” from 13^th to 17^th March 2023. 
• Attended the AICTE-VTU Joint Teachers training Programme on “Introduction to Web Programming” from 27^th to 31^st March 2023. 
• Attended the AICTE-VTU Joint Teachers training Programme on “Introduction to Internet of Things (IoT)” from 17^th to 21^st April 2023.
• Attended the AICTE-VTU Joint Teachers training Programme on “Robotics & Artificial Intelligence” from 24^th to 28^th April 2023.

Papers presented/published in National and International Journals: 07

Memberships of Professional bodies:

Life Member of “Indian Society for Technical Education (ISTE)”.

Life Member of “Swadesi Vignana Andolana, Karnataka (SVAK)”.

Publications 

• “Evaluation of Mechanical Properties of Banana-Glass Fiber Reinforced Hybrid Composite”, Proceedings of International Conference on Innovations And Emerging Trends in Mechanical Engineering 13th June 2014, Nagarjuna College of Engineering & Technology, Bangalore, India.
• “Development of SiC Filled Bamboo/Epoxy Composites and its Mechanical Properties Evaluation” International Journal of Innovative Technologies ISSN 2321-8665 volume 06, Issue no. 01, January-June2018, Pages: 0308-0321.
• “Production and Evaluation of engine performance and emission characteristics of composite biodiesel from michelia champaca and amoora rohituka oils in a CRDI VCR diesel engine” Elsevier Results in Engineering, volume 26, May 2025.

• Attended One week AICTE/VTU joint teachers training Program on “Introduction to Python Programming and its applications” VTU, Centre for PG studies, VIAT, Muddenahalli, Chickballapur in online mode 13-03-2023 to 17-03-2023.
• Presented and published 2 national and international journal papers.
• Attended around 10 workshop on different topics.
• Guided a U.G project entitled ” Design and fabrication foot step power generation ” which was selected for 1st prize in national level competition.
• Guided a U.G project entitled ” Design and fabrication of duster cleaning machine” which was sponsored by KSCST during 39rd series of SSP held in MCE Hassan.
• Worked as Academic coordinator, Industrial trip coordinator, currently working as project coordinator.
• Guided a U.G project entitled ” Design and fabrication of whirling of shaft ” which is a experiment to be conducted in Design laboratory.
• Currently one project entitled “Design and fabrication of bed making machine around areca nut tree and for weed removing process” is applied for KSCST 55th series.

• Participated in the workshop programme on “RECENT DEVELOPMENTS IN COMPOSITE MATERIALS AND METAL MATRIX” on 20th October 2010 at new horizon college of engineering, Bangalore.
• Participated VTU sponsored two days Faculty Development Program on “MULTIBODY DYNAMICS”, on 2^nd & 3^rd  Feb 2012 at VTU Regional Office, Mysore.
• Attended 2 days workshop on “NOISE AND VIBRATION CONTROL” on 16th& 17th April 2012 at Nagarjuna College of Engineering & Technology, Bangalore.
• Participated in the“MISSION10XCONCLAVE2012” on 25^th August 2012 at Vidya Vikas Institute of Technology, Mysore.
• Participated TEQIP-II sponsored one day workshop on “COMPOSITE MATERIALS AND ITS APPLICATIONS” on 24th April 2013 at Dr. AIT, Bangalore.
• Attended SPP conducted by Karnataka State Council for Science and Technology 2day programme on a project entitled “AUTOMATIC ELECTRO-MECHANICAL GEAR SYSTEM”, on 30th& 31st at Angadi Institute of Technology and Management, Belagavi.